|
This is the most powerful MWT device on the Market, bar none!!
It's the BIG Dog!!
Each model TAT-21 uses two 2" x 2" x
1"
N42 Grade Triple Plated Neodymium Rare Earth Magnets.
Each magnet has a pull force of
193 pounds
(384
pound combined pull force).
The magnets alone are a $ 80.00 value.
Handle
with care! These magnets can bite!!
Model TAT-21
Trentatron (for Spas, Pools, Commercial or Well Water
Service)
Model TAT-21
Trentatron
(for Well Water Systems, Spas, Pools, Commercial Water
Service)
Designed for
1 1/2 Inch to 2 1/2 Inch Copper or
1 1/4
Inch to 2 1/2 Inch PVC pipe sizes.
Peak
Flux density ≥ 6100 Gauss@ min. pipe O.D.
Maximum Temperature 175° F.
193 lbs. Pull Force per
Magnet. 386 lbs. Combined
Magnets are 2" Long x 2" Wide x 1"
Thick
Weight: 4 lbs. 13 oz.
Frame is 5.25" Tall x 3" Long x
4.00" Wide (including bolts)
Warning: These are extremely
powerful magnets. Retail Price:
$149.99
Internet Sales Price: $ 119.99
|
TAT-21 |
|
We Provide Free USPS Priority Mail Shipping to
the US!
Please
contact us for International Shipping Quotes!
Trentatrons
are the most powerful permanent magnet water conditioning
devices available! They produce a flux field density
that is 5 TIMES STRONGER
than any ceramic (ferrite) magnet based device on the market. This is made
possible through the use of high grade Neodymium rare-earth magnets
and a heavy carbon structural steel frame.
Trentatrons
provide an environmentally friendly, cost effective addition to
conventional pool & SPA water treatments.
Are you a pool owner with "very hard water"
service? If so, you really need a magnetic water conditioner to
eliminate the ugly scale buildup on your pool surfaces. Why
scrape and scrub your tile surfaces every year when a Trentatron
will continually do it for you. Permanently eliminate scale
buildup.
Adding a Trentatron
to your spa or pool will provide the
following benefits:
 |
Reduce the chemical levels you
must maintain in the water, thereby reducing maintenance costs and
skin and eye irritations. |
|
Provide a softer more silky
feeling water. |
|
Improve the water clarity. |
|
Help stabilize the ph level
of the water. |
|
Help fight the growth of algae
and bacteria. |
|
Improve the efficiency of your
heater by eliminating scale, thereby reducing heater energy costs. |
|
Improve the effectiveness of
ozoneators and UV units. |
|
And for those of us who can be
neglectful of our spas, a more forgiving water that does not turn
bad on us when we get busy. |
All pools and spas have water that is harder than
the tap water with which they are filled. This is due to the
evaporation of the water which leaves the minerals behind.
Harder water results in higher water
surface tension which lowers the solubility of the water Chemicals
added to the pool or spa do not blend well in this harder water. As a
result, greater amounts of chemicals are required to perform at the
same level. In addition, hard water precipitates out of solution and
forms ugly scale on pool tiles and in the plumbing. Finally, hard pool
or spa water "feels" hard and lacks clarity. Magnetizing
the water using
our Trentatrons
will reduce the water surface tension which greatly improves the
functions of the pool chemicals. This allows you to dramatically
reduce the amount of chemicals used, saving you time and money.
Find out what many others have already found out.
Wow, these things really do work!
I would have never believed it, had I not seen it for myself!
Why buy a
Trentatron
over other similar products? Namely, price, quality, and flux
power density inside the pipe.
|
All
Trentatrons
use frames machined from heavy
cold rolled steel material. |
|
Our frames have a Polyester Powder Coat
finish for long term corrosion and UV resistance. |
|
Our Neodymium magnets are extremely
powerful and have a triple Nickel/Copper/Nickel plating for lifetime corrosion resistance.
They also have a lifetime power warranty. These magnets have a
pull force
193
pounds apiece (386
lb combined). Ceramic magnet based
devices use 17 or 24 pound pull force magnets. |
|
We use only stainless steel
fasteners for long term corrosion resistance and minimal response to
the magnet field. |
This TAT-21 model is designed
mainly for commercial and residential pool applications.
They are also suitable for commercial or well water service pipes
starting with
1 1/2" copper or 1 1/4" PVC.
|
