Our newly
designed units are made with 10 Gauge Cold Rolled Carbon Steel
Installation
is very simple and easy.
Price Alert:
Prices for Rare Earth Magnets have increased 600% since last
October. This has required us to make substantial increases
to the sale prices of all our inventory. We regret having to
raise our prices and hopefully rare earth material prices will
come back down to earth in the future and allow us to reduce our
prices back down to normal.
 | Our Trentatrons
are constructed from 10 Gauge Cold Rolled Carbon Steel.
This heavy steel material has the highest magnetic properties
and is vitally important in our
Trentatron design.
These are machined parts built to best commercial standards.
We only use US Steel and US Powder Coat in our frame
construction. |
| To protect our steel frames we use a two step powder coat
treatment. Our steel frames are plated with phosphate as a
primer coat and then given a powder coat treatment using
polyester powder. This provides long term corrosion
resistance. |
| Our magnets are High Grade Triple Plated (Nickel, Copper,
Nickel) Neodymium Magnets
which produces the most powerful flux density possible using
permanent magnets. |
| The faces of our magnets are fully protected against
mechanical abrasion and galvanic corrosion.
Bare faced
Neodymium magnets can not be used on copper pipe in a damp
environment without this added protection.
Don't buy from any vendor who does not understand this issue.
Our magnets will last a lifetime but only
because they are well protected against abrasion and corrosion
of the magnet plating. |
| All of our fasteners are Stainless Steel for long term
corrosion protection and minimal reaction to the magnetic field. |
| Trentatrons come Fully Assembled
ready to go with no rework required. |
| Trentatrons
are Made
in the USA. |
| Trentatrons are
not "One Size Fits All" units. Larger pipes
need larger magnets to maintain the field strength and also the
coverage of the field. A one inch wide magnet on a 2 1/2"
pipe just won't do the job. We offer six different sizes
of frames and magnets to fit any size pipe from 1/4" copper to
4" PVC . |
It is best to know how hard your water is to determine how many
units you need for your particular application. Your city
water departments have that information available upon request.
Private well owners can have their water tested also. But you
should have a good idea of how hard your water is, even if it
hasn't been tested. If it's not that bad but still is hard
water you may only need one unit on your main water line. If
it's the hardest water you have ever seen then you may need three
units for your main water line. If it's in-between then two
may work just fine. Here is our guidelines on this:
- If the Total Hardness of your water is 10.5 Grains (180 ppm)
or less, one unit on the cold water source may be all that you
need.
- If it ranges between 10.5 and 15 Grains (180 to 257 ppm) we
recommend two or three units on the cold water supply.
- You should use three units on the cold water supply if your
Total Hardness exceeds 15 Grains (257ppm).
We Provide
Free US Priority Mail for US Shipments.
For Canadian customers please add
Canadian Shipping to your order.
Please contact us for shipping quotes for
delivery outside Canada and the United States.
To
protect your identity and card information I use Paypal for all
credit card payments.
I
prefer the safety and protection that Paypal payments give to my
customers and to me.
If
you have any questions or just want to talk to someone here first,
please call
972-530-7015.
Thank
you!! Allen R. Trent
|
Product
|
Specification |
|
Single TAT-1/2 |
Model TAT- 1/2
Trentatron
(for
Water Service lines for icemakers, coffee machines,
dishwashers, etc.)
Designed for 1/4 Inch Copper up to 1/2 Inch PVC pipe sizes.
Peak Flux density ≥
7400
Gauss@ min.
pipe OD
48
lbs. Pull Force per Magnet. 96 lbs. Combined
Magnets are 2" Long x .5" Wide x
.5" Thick
Weight: 1 lb. 2 oz.
Frame is 2.00" Tall x 3" Long x
2.00" Wide (including bolts)
Maximum Operational Temperature
175° F.
Retail Price: $79.99
Internet Sales Price: $ 49.99 |
|
|
Single TAT-1 |
Model TAT- 1
Trentatron (for
Cold Water Service line or Hot Water Booster Unit)
Designed for 1/4 Inch to 1 1/4 Inch Copper or 1/4 Inch to 1
Inch PVC pipe sizes.
Peak Flux density ≥
8300
Gauss@ min.
pipe OD
68 lbs. Pull Force per Magnet.
136 lbs. Combined
Magnets are 2" Long x 1" Wide x
.5" Thick
Weight: 1 lb. 9 oz.
Frame is 2.75" Tall x 3" Long x
2.50" Wide (including bolts)
Maximum Operational Temperature
175° F.
Retail Price: $119.99
Internet Sales Price: $ 79.99 |
|
|
Two TAT-1 |
2
Model TAT- 1
Trentatrons
for typical residential household having one hot water heater.
| One for incoming cold water supply placed between the
service side of the water meter and the house and lawn
service. |
| One placed on the Hot Water Pipe coming out of the hot
water heater as a booster. |
Retail Price:
$239.98
Internet Sales Price: $ 149.99
|
|
|
Three TAT-1 |
3
Model TAT- 1
Trentatrons
for typical residential household having very hard water or two hot water
heaters.
| One or two for incoming cold water supply placed between the
service side of the water meter and the house and lawn
service. |
| One or Two placed on the Hot Water Pipe coming out of the
hot water heaters as a booster. |
Retail Price:
$359.99
Internet Sales Price:
$219.99
January
Sales Special
$199.99
Free US Priority Mail Shipping
|
|
|
Four TAT-1 |
4
Model TAT- 1
Trentatrons
for typical residential household having two hot water
heaters or needing boosters on cold water supply lines.
| Two or Three for incoming cold water
supply placed between the service side of the water meter
and the house and lawn service. |
| One or Two placed on the Hot Water Pipe
coming out of the hot water heaters as a booster. |
Retail Price:
$ 479.96
Internet Sales Price: $ 249.99
|
|
|
Three TAT-1 with
TAT-1/2 Booster
Unit |
Residential Combination Package RCP- 1
3 Model TAT-1
Trentatrons
for typical residential household having very hard water or two hot water
heaters and 1 model TAT-1/2 small water line booster unit.
| One or two for TAT-1's for the incoming cold water supply placed between the
service side of the water meter and the house and lawn
service. |
| One or Two placed on the Hot Water Pipe coming out of the
hot water heaters as a booster. |
| One TAT-1/2 placed on ice maker, dish
washer, coffee machine water lines. |
Retail Price:
$414.96
Internet Sales Price: $ 239.99
|
|
|
TAT-2 |
Model
TAT- 2
Trentatron
(for Well Water Systems, Spas, Hot Tubs, Commercial Water Service)
*Designed for
3/4 Inch Copper Pipe to 2 Inch PVC pipe sizes.
Peak
Flux density ≥ 6000 Gauss@ min. pipe O.D.
Maximum Temperature 175° F.
97
lb. Pull Force per Magnet. 194 lb. Combined
Magnets are 2" Long x 2" Wide x
.5" Thick
Weight: 2 lbs. 10 oz.
Frame is 3.75" Tall x 3" Long x 3.50" Wide
(including bolts) Retail Price:
$179.99
Internet Sales Price: $ 119.99
|
|
|
TAT-21 |
Model
TAT- 21 "Big Dog"
Model TAT-21
Trentatron
(for Well Water Systems, Spas, Pools, Commercial Water
Service)
Designed for
1 1/4 Inch to 2 1/2 Inch Copper or
1
Inch to 2 1/2 Inch PVC pipe sizes.
Peak
Flux density ≥ 6100 Gauss@ min. pipe O.D.
Maximum Temperature 175° F.
200 lbs. Pull Force per
Magnet. 400 lbs. Combined
Magnets are 2" Long x 2" Wide x 1"
Thick
Weight: 4 lbs. 13 oz.
Frame is 5.25" Tall x 3" Long x
4.00" Wide (including bolts)
Warning: These are extremely
powerful magnets. Retail Price:
$329.99
Internet Sales Price: $ 199.99
Note:
Current market prices for the magnets in this unit is $240 alone.
|
|
|
TAT-4 |
Model
TAT- 4 "Mini Monster"
Designed
for Large Well Water and Irrigation Systems, Large Pools,
and Commercial Water
Service)
Designed for
2 ½ Inch to 4 Inch Copper or
2 ½ Inch to
4 Inch Inch PVC pipe sizes.
Peak
Flux density ≥ 5100 Gauss@ min. pipe O.D.
Maximum Temperature 175° F.
400 lbs. Pull Force per
Magnet. 800 lbs. Combined
Magnets are 4" Long x 4" Wide x 1"
Thick
Weight: 16 lbs. 0 oz.
Frame is 7.00" Tall x 6" Long x
6.00" Wide (including bolts)
Warning: These are extremely
powerful magnets. Retail Price:
$799.99
Internet Sales Price: $ 699.99
Note:
The TAT-4 units are special order items that are built to order.
As such these units are not returnable for a refund. These
units are normally ready for shipment in three business
days.
|
|
WWS-2 |
Well Water Combination
WWS- 2
This package is for well water
systems having very hard water and cold water pipes in the
3/4" Copper to 2" PVC
pipe ranges. It provides 2 Each Model TAT-2 and 1 Each Model
TAT-1. The TAT-1 provides a booster unit for the Hot Water Service Pipe.
See photos and descriptions above for details of each Model.
Retail Price:
$479.97
Internet Sales Price: $ 279.99
|
|
 |
Standard Shipping to
Canada For shipments to Canada we use USPS Global
Priority Mail. This is required to cover
additional shipping costs and customs documentation requirements.
Cost: $ 20.00 |
|
|
